BobDuris transmitter 12/2015:
         Channel   CH1  CH2  CH3  CH4  CH5  CH6  CH7  CH8
Band A(1) Switch  1111 1101 1011 1001 0111 0101 0011 0001
       Frequency  5865 5845 5825 5805 5785 5765 5745 5725
Band E(3) Switch  1110 1100 1010 1000 0110 0100 0010 0000
       Frequency  5705 5685 5665 5645 5885 5905 5925 5945
  BobDuris transmitter has:
    FX758-2 5.8G 200mW 32CH FPV Wireless Audio Video AV Transmitter Module  $11.16 / $12.59
    http://www.banggood.com/FPV-5_8G-200mW-32CH-Wireless-Audio-Video-AV-Transmitter-Module-FX758-2-p-980317.html
    Pololu Adjustable Step-Up/Step-Down Voltage Regulator S7V8A (2.7V-11.8V input)
    https://www.pololu.com/product/2118


---------------------------------------------------------------------


At 04:19 PM 2/8/2016, Robert Duris wrote:
Hi Eric,

Here's the link:

http://www.banggood.com/FPV-5_8G-200mW-32CH-Wireless-Audio-Video-AV-Transmitter-Module-FX758-2-p-980317.html

Just be aware that they are very deceptive in the description.  Unless they
have changed the board (which is always a possibility) it comes with the SPI
interface enabled. Which means that you only get the default channel of 5865
MHz unless you either do the wiring mod, or connect a uProcessor and program
it using the provided pins.  May I ask just what you plan for it? Or is that
what you want to put on the Bug? I have an extra five in stock and could
give you one or two on Wednesday if you like.  I might also have a modded
one that I just haven't gotten around to adding the Pololu yet. And, I also
have a couple of 5823 Tx boards that are the same form factor that I want to
evaluate for comparison (eventually). They are single band, but at least you
can select channels.  The bad thing is supposedly a greater sensitivity to
supply noise.

  - Bob